About Moe
Galleries
Videos
New Stuff
HOME
Home
About Moe
Galleries
Videos
New Stuff
Home

About Moe

Videos

A MoeProduction Design copyright 2004
Gaming the way you remember it
If you are one of the many out there that are going to mod your CVS camcorder ,then let me share my mod with you.I wish I had more step by step pictures .I was caught up in the moment and forgot to take some shots,but you get the idea.The USB connector was unsoldered from a modem I had laying around.I soldered the wires and connector to the board.I didn't want the silver casing to show as many others have .The opening was made using a step drillbit for the starting hole and a square file to create the shape I wanted. With a meter I traced back away from the original port connections to reduce how many cables you saw thru the opening at the top of the camera.That is why my ground and 5+ are soldered to another point. The two plastic supports running up and down on the side was trimmed at the bottom to alow the pc board to sit right up to the edge.
Larger image
Larger image
Larger image
Larger image
Larger image
This is what the opening looks like up close.Thanks for looking. I'll post any changes that come up....Luis